[DIT-5200][Features][Overview][Sensors][Specifications]
 



SYSTEM SPECIFICATIONS (COMMON TO ALL)

Target material:

  • Aluminum.

Output voltage:

  • ±10 volts typical

Power dissipation:

  • At 15N sensor head: <0.5 mW/sensor typical.
  • At 20N sensor head: <2 mW/sensor typical.
  • Electronics: <1.35 Watts.

Frequency response:

  • 0-20 KHz.

Input Voltage:

  • ±15 volts.

Output impedance:

  • <1 Ohm.

Weight:

  • Electronics: 6 oz.
  • W/4 15N sensors : 8 oz.

Operating temperature range:

  • Electronics: +32°F to +140°F (0°C to +60°C).
  • Sensors: -62°F to +220°F (-52°C to +105°C).

Storage temperature range:

  • Electronics: -26°F to +180°F (-32°C to +82°C).
  • Sensors: -62°F to +220°F (-52°C to +105°C).

 

PERFORMANCE SPECIFICATIONS

Range
± mil

Range
± mm

Null
mil

Null
mm

Sensor

Typical
Non-Linearity
± %FR

Maximum
Non-Linearity
± %FR

Typical
Sensor
TempCo
± %FR/°C

Resolution
p-p%FR
at 1 kHz
BW at FR

Resolution
p-p%FR
at 1 kHz
BW at Null

Dual
Channel
Part
Number
10 0.25 15 0.38 15N 0.15% 0.30% 0.02% 0.015% 0.004% 854924-003
10 0.25 20 0.51 20N 0.10% 0.20% 0.02% 0.025% 0.005% 854925-002
20 0.51 25 0.64 15N 0.25% 0.50% 0.03% 0.008% 0.002% 854924-004
20 0.51 40 1.02 20N 0.15% 0.30% 0.02% 0.015% 0.005% 854925-003
35 0.89 40 1.02 15N 0.50% 1.00% 0.03% 0.005% 0.003% 854924-005
50 1.27 60 1.52 20N 0.25% 0.50% 0.03% 0.008% 0.003% 854925-004
75 1.91 85 2.16 20N 0.50% 1.00% 0.03% 0.005% 0.002% 854925-005

Note:
Full range (FR) is considered as twice the ±range value.
Temperature coefficient at null <0.005% FR/¡C typical.
Performance specifications are based on aluminum target.
For single channel system, add an S to the end of the dual channel part number. Ex: 854924-003S.

 

OEM CONFIGURATIONS

Sensors, cable lengths and electronics packaging can be reconfigured for special customer applications or OEM requirements.

[Typical OEM PCB version electronics]

All dimensions shown in inches (mm).

Typical OEM PCB version electronics.

 

[Standard enclosure]

All dimensions shown in inches (mm).

Standard enclosure, dual channel 15N configuration. Note: single channel systems use the x axis sensor connectors.

 

ORDERING INFORMATION

Each of the part numbers (see Performance Specifications) include the electronics housed in an aluminum enclosure, one pair of matched sensors per channel and an 18 inch I/O cable with mating 9-pin connector.

OEM applications have always been a Kaman specialty. We will work with your design engineers to provide a unique solution for your application.