KD-2300 Sensors

.5SU / .5SUM

[Sensor .5SU / .5SUM]

Dimensions
shown in
inches (mm).

Sensor Type		.5SU	.5SUM
Target material	non-mag magnetic	Yes No	No Yes
Measuring range (+10% nominal offset)	mil* mm	20 0.5	20 0.5
Offset	mil* mm	2 0.05	2 0.05
Nonlinearity (±1% of measuring range)	±mil* ±mm	0.2 0.005	0.2 0.005
Static Resolution - mid range Analog	mil* µm	0.004 0.1	0.004 0.1
Sensitivity <= mid range Customer adjustable	mV/mil* mV/mm	50 1000	50 1000
Output, full range Voltage analog Factory setting Customer adjustable	Vdc(eng.) Vdc(met.)	1.000 0.500	1.000 0.500
Output, full range Current Impedance	mA ohms	Maximun of 15 Less than 5
Thermal sensitivity shift <= mid range (Sensor/target interface)		0.1% FSO/°F without temp.comp.; 0.02% FSO/°F with temp. comp.
**Frequency response		Static to 50 kHz (-3dB pt.)

*mil = 0.001 inch

**Maximum frequency response is sensitivity dependent.
At maximum sensitivity, the -3 dB level is 10 kHz.
At 10% of maximum sensitivity, frequency response is 50 kHz (optimum).

1S / 1SM

[Sensor 1S / 1SM]

Dimensions
shown in
inches (mm).

Metric threads
optional
(M7 x 1).

Sensor Type		1S	1SM
Target material	non-mag magnetic	Yes No	No Yes
Measuring range (+10% nominal offset)	mil* mm	40 1.0	40 1.0
Offset	mil* mm	2 0.05	2 0.05
Nonlinearity (±1% of measuring range)	±mil* ±mm	0.4 0.01	0.4 0.01
Static Resolution - mid range Analog	mil* µm	0.004 0.1	0.004 0.1
Sensitivity <= mid range Customer adjustable	mV/mil* mV/mm	20 1000	20 1000
Output, full range Voltage analog Factory setting Customer adjustable	Vdc(eng.) Vdc(met.)	0.800 1.000	0.800 1.000
Output, full range Current Impedance	mA ohms	Maximun of 15 Less than 5
Thermal sensitivity shift <= mid range (Sensor/target interface)		0.1% FSO/°F without temp.comp.; 0.02% FSO/°F with temp. comp.
**Frequency response		Static to 50 kHz (-3dB pt.)

*mil = 0.001 inch

**Maximum frequency response is sensitivity dependent.
At maximum sensitivity, the -3 dB level is 10 kHz.
At 10% of maximum sensitivity, frequency response is 50 kHz (optimum).

1SU / 1SUM

[Sensor 1SU / 1SUM]

Dimensions
shown in
inches (mm).

Metric threads
optional
(M7 x 1).

Sensor Type		1SU	1SUM
Target material	non-mag magnetic	Yes No	No Yes
Measuring range (+10% nominal offset)	mil* mm	50 1.25	50 1.25
Offset	mil* mm	2 0.05	2 0.05
Nonlinearity (±1% of measuring range)	±mil* ±mm	0.5 0.0125	0.5 0.0125
Static Resolution - mid range Analog	mil* µm	0.005 0.1	0.005 0.1
Sensitivity <= mid range Customer adjustable	mV/mil* mV/mm	20 1000	20 1000
Output, full range Voltage analog Factory setting Customer adjustable	Vdc(eng.) Vdc(met.)	1.000 1.250	1.000 1.250
Output, full range Current Impedance	mA ohms	Maximun of 15 Less than 5
Thermal sensitivity shift <= mid range (Sensor/target interface)		0.1% FSO/°F without temp.comp.; 0.02% FSO/°F with temp. comp.
**Frequency response		Static to 50 kHz (-3dB pt.)

*mil = 0.001 inch

**Maximum frequency response is sensitivity dependent.
At maximum sensitivity, the -3 dB level is 10 kHz.
At 10% of maximum sensitivity, frequency response is 50 kHz (optimum).

2S

[Sensor 2S]

Dimensions
shown in
inches (mm).

Metric threads
optional
(M12 x 1).

Sensor Type		2S
Target material	non-mag magnetic	Yes Yes
Measuring range (+10% nominal offset)	mil* mm	100 2.5
Offset	mil* mm	10 0.25
Nonlinearity (±1% of measuring range)	±mil* ±mm	1.0 0.025
Static Resolution - mid range Analog	mil* µm	0.01 0.3
Sensitivity <= mid range Customer adjustable	mV/mil* mV/mm	10 1000
Output, full range Voltage analog Factory setting Customer adjustable	Vdc(eng.) Vdc(met.)	1.000 2.500
Output, full range Current Impedance	mA ohms	Maximun of 15 Less than 5
Thermal sensitivity shift <= mid range (Sensor/target interface)		0.1% FSO/°F without temp.comp.; 0.02% FSO/°F with temp. comp.
**Frequency response		Static to 50 kHz (-3dB pt.)

*mil = 0.001 inch

**Maximum frequency response is sensitivity dependent.
At maximum sensitivity, the -3 dB level is 10 kHz.
At 10% of maximum sensitivity, frequency response is 50 kHz (optimum).

6C

[Sensor 6C]

Dimensions
shown in
inches (mm).

Sensor Type		6C
Target material	non-mag magnetic	Yes Yes
Measuring range (+10% nominal offset)	mil* mm	250 6.4
Offset	mil* mm	30 0.75
Nonlinearity (±1% of measuring range)	±mil* ±mm	2.5 0.064
Static Resolution - mid range Analog	mil* µm	0.025 0.6
Sensitivity <= mid range Customer adjustable	mV/mil* mV/mm	5 100
Output, full range Voltage analog Factory setting Customer adjustable	Vdc(eng.) Vdc(met.)	1.250 0.640
Output, full range Current Impedance	mA ohms	Maximun of 15 Less than 5
Thermal sensitivity shift <= mid range (Sensor/target interface)		0.1% FSO/°F without temp.comp.; 0.02% FSO/°F with temp. comp.
**Frequency response		Static to 50 kHz (-3dB pt.)

*mil = 0.001 inch

**Maximum frequency response is sensitivity dependent.
At maximum sensitivity, the -3 dB level is 10 kHz.
At 10% of maximum sensitivity, frequency response is 50 kHz (optimum).

8C

[Sensor 8C]

Dimensions
shown in
inches (mm).

Sensor Type		8C
Target material	non-mag magnetic	Yes Yes
Measuring range (+10% nominal offset)	mil* mm	500 12.7
Offset	mil* mm	50 1.25
Nonlinearity (±1% of measuring range)	±mil* ±mm	5.0 0.127
Static Resolution - mid range Analog	mil* µm	0.05 1.3
Sensitivity <= mid range Customer adjustable	mV/mil* mV/mm	2 100
Output, full range Voltage analog Factory setting Customer adjustable	Vdc(eng.) Vdc(met.)	1.000 1.270
Output, full range Current Impedance	mA ohms	Maximun of 15 Less than 5
Thermal sensitivity shift <= mid range (Sensor/target interface)		0.1% FSO/°F without temp.comp.; 0.02% FSO/°F with temp. comp.
**Frequency response		Static to 50 kHz (-3dB pt.)

*mil = 0.001 inch

**Maximum frequency response is sensitivity dependent.
At maximum sensitivity, the -3 dB level is 10 kHz.
At 10% of maximum sensitivity, frequency response is 50 kHz (optimum).

10C

[Sensor 10C]

Dimensions
shown in
inches (mm).

Sensor Type		10C
Target material	non-mag magnetic	Yes Yes
Measuring range (+10% nominal offset)	mil* mm	750 19.1
Offset	mil* mm	100 2.5
Nonlinearity (±1% of measuring range)	±mil* ±mm	7.5 0.191
Static Resolution - mid range Analog	mil* µm	0.075 1.9
Sensitivity <= mid range Customer adjustable	mV/mil* mV/mm	1 100
Output, full range Voltage analog Factory setting Customer adjustable	Vdc(eng.) Vdc(met.)	0.750 1.910
Output, full range Current Impedance	mA ohms	Maximun of 15 Less than 5
Thermal sensitivity shift <= mid range (Sensor/target interface)		0.1% FSO/°F without temp.comp.; 0.02% FSO/°F with temp. comp.
**Frequency response		Static to 50 kHz (-3dB pt.)

*mil = 0.001 inch

**Maximum frequency response is sensitivity dependent.
At maximum sensitivity, the -3 dB level is 10 kHz.
At 10% of maximum sensitivity, frequency response is 50 kHz (optimum).

10CU

[Sensor 10CU]

Dimensions
shown in
inches (mm).

Sensor Type		10CU
Target material	non-mag magnetic	Yes Yes
Measuring range (+10% nominal offset)	mil* mm	1000 25.4
Offset	mil* mm	100 2.5
Nonlinearity (±1% of measuring range)	±mil* ±mm	10.0 0.254
Static Resolution - mid range Analog	mil* µm	0.1 2.5
Sensitivity <= mid range Customer adjustable	mV/mil* mV/mm	1 100
Output, full range Voltage analog Factory setting Customer adjustable	Vdc(eng.) Vdc(met.)	1.000 2.540
Output, full range Current Impedance	mA ohms	Maximun of 15 Less than 5
Thermal sensitivity shift <= mid range (Sensor/target interface)		0.1% FSO/°F without temp.comp.; 0.02% FSO/°F with temp. comp.
**Frequency response		Static to 50 kHz (-3dB pt.)

*mil = 0.001 inch

**Maximum frequency response is sensitivity dependent.
At maximum sensitivity, the -3 dB level is 10 kHz.
At 10% of maximum sensitivity, frequency response is 50 kHz (optimum).

12CU

[Sensor 12CU]

Dimensions shown in
inches (mm).

Sensor Type		12CU
Target material	non-mag magnetic	Yes Yes
Measuring range (+10% nominal offset)	mil* mm	2000 50.8
Offset	mil* mm	200 5.0
Nonlinearity (±1% of measuring range)	±mil* ±mm	20.0 0.508
Static Resolution - mid range Analog	mil* µm	0.2 5.1
Sensitivity <= mid range Customer adjustable	mV/mil* mV/mm	0.5 100
Output, full range Voltage analog Factory setting Customer adjustable	Vdc(eng.) Vdc(met.)	1.000 5.080
Output, full range Current Impedance	mA ohms	Maximun of 15 Less than 5
Thermal sensitivity shift <= mid range (Sensor/target interface)		0.1% FSO/°F without temp.comp.; 0.02% FSO/°F with temp. comp.
**Frequency response		Static to 50 kHz (-3dB pt.)

*mil = 0.001 inch

**Maximum frequency response is sensitivity dependent.
At maximum sensitivity, the -3 dB level is 10 kHz.
At 10% of maximum sensitivity, frequency response is 50 kHz (optimum).