SPECIFICATIONS

Operating temperature range:

• Sensor: -67°F to +220°F (-55°C to +105°C).
• Cable and connector: Standard PVC or optional Teflon;* -67°F to +220°F
  (-55°C to +105°C).
• Electronics: +32°F to +132°F (0°C to +55°C).

Storage temperature range:

• Sensor, cable and connector: Standard PVC or optional Teflon;* -67°F to +220°F
  (-55°C to +105°C).
• Electronics: -67°F to +220°F (-55°C to +105°C).

Power supply requirements:**

• Voltage: ±12 Vdc to ±15 Vdc.
• Voltage regulation: ±1/2 Vdc.
• Current: 70 mA.
  
  *Standard on .5SU and .5SUM; available only on -1SM and -1SUM.
  **Recommend Kaman P-3410 and P-3450.

Dimensions shown in inches (mm).

KD-2300 dimensions.

ACCESSORIES

Power supplies:

• Regulated ±15 Vdc with 115 VAC input; optional 230 VAC input available.
• Model P-3410 - single channel.
• Model P-3450 - up to six channels.

Micrometer calibration fixture (through -6C system):

• English part number: 850854-001.
• Metric part number: 850854-002.
• Digital part number: 850854-003.

Ceramic calibration spacers:

• Set of seven, 0.050-inch through 1.0-inch (part number 850859-001).
  

OPTIONS

Sensor cable lengths shorter or longer than the standard ten feet, up to 30 feet.

Eleven point linearity data.

Temperature compensation over a +100°F (+50°C) band.

System synchronization, required to prevent beat note interference or cross talk between sensors when sensors of two or more systems are mounted less than three sensor-diameters apart.

Oscillator frequency change.

Bridge conversion module.

Moderate temperature (to +400°F or +204°C) versions of some sensors are available.

Single coil sensors. A wide variety of single coil sensors are also available. Contact Kaman.