[KD-2440][Features][Overview][Sensors][Specifications]
 



Electrical

Input:

  • Voltage: Regulated 12 Vdc to 24 Vdc
  • Current: Fuse limit input current from power source to 11 mA, .28W maximum at full load

Analog output:

  • Current (full load): 4.2 mA maximum
  • Impedance: 50 ohms
  • Voltage: 0-22 Vdc minimum with 24 Vdc input; 0-10 Vdc minimum with 12 Vdc input
  • Frequency response: 0-10 KHz (± 3db)

Switched output:

  • Load current: 100 mA maximum AC or DC
  • Load voltage: 30 V r.m.s., 42.4 V peak, or 60 Vdc
  • On resistance: 30 ohms minimum / 50 ohms maximum
  • Switch point hysteresis: 0.56% of full scale for 9C sensor, and 0.97% of full scale for 5CM sensor using 24 Vdc input on 4130 steel
  • Frequency response: 3.3 KHz

Resolution:

  • Less than .008% of measuring range using a 5CM sensor on a 4130 steel target at mid scale, mid gain, and 12 Vdc input

Environmental

Operating temperature range:

  • Sensor and cable: 0°F to +400°F (-18°C to +205°C)
  • Electronics: +32°F to +150°F (0°C to +66°C)

Storage temperature range:

  • Sensor and cable: -60°F to +400°F (-52°C to +205°C)
  • Electronics: -58°F to +212°F (-50°C to +100°C)

Thermal drift:

  • Less than 0.22% per °C of full scale for sensor, electronics or system.

IP rating:

  • Sensor: IP67
  • Electronics: IP40

 

[KD-2440 electronics]

Dimensions shown in inches (mm).

KD-2440 proximity measuring electronics

 

[KD-2440 power/output cable]
Dimensions shown in inches (mm).

KD-2440 power/output cable (order number 854981-072)

 

[KD-2440 sensor adapter cable]
Dimensions shown in inches (mm).

KD-2400 to KD-2440 sensor adapter cable (order number 854993-001)

 

[KD-2440 mounting bracket]
Dimensions shown in inches (mm).

KD-2400 to KD-2440 adapter mounting bracket (order number 815945-001)

 


MOUNTING OPTION: DIN MOUNT INTERFACE MODULE

FEATURES

  • Easy retrofit into existing equipment and electronics enclosures.

  • DB9 connector mates directly to the KD-2440.

  • Terminal strip connections for power input, analog voltage output and switched output.

ORDERING INFORMATION

  • KD-2440-5CM-DIN part number: 854980-003. Complete system including electronics, 5CM sensor and DIN interface module.

  • KD-2440-9C-DIN part number: 854979-003. Complete system including electronics, 9C sensor and DIN interface module.

  • Interface module only part number: 826721-005.