| |
2U ![[Sensor 2U]](images/sensr-2U.GIF)
Dimensions
shown in
inches (mm). back to top | Non-magnetic targets characterized on aluminum.
Magnetic targets characterized on 4130 steel. Sensor not available with extension cable for steel.
| Standard KµDA Sensor Type 2U | Non-magnetic
targets | Magnetic
targets | | Offset | inch
(mm) | 0.002
(0.05) | 0.002
(0.05) | | Full scale output voltage for testing | Volts dc | 10 | ±10 | | Sensor thermal sensitivity shift with active temp. compensation | %/°C
maximum | ±0.01 (standard
range, 10°C - 50°C) | ±0.03 (standard
range, 25°C - 100°C) | | Standard measuring range | inch
(mm) | 0.020
(0.5) | 0.010
(0.25) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.3
0.4 | 0.3
0.5 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.2
0.2 | 0.1
0.2 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.04
0.08 | 0.06
0.12 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | | Extended measuring range | inch
(mm) | 0.030
(0.75) | 0.015
(0.375) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.8
1.0 | 0.8
1.0 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.3
0.4 | 0.2
0.3 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.04
0.15 | 0.06
0.15 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | |
4U ![[Sensor 4U]](images/sensr-4U.GIF)
Dimensions
shown in
inches (mm). back to top | Non-magnetic targets characterized on aluminum.
Magnetic targets characterized on 4130 steel. Sensor not available with extension cable for steel.
| Standard KµDA Sensor Type 4U | Non-magnetic
targets | Magnetic
targets | | Offset | inch
(mm) | 0.005
(0.125) | 0.005
(0.125) | | Full scale output voltage for testing | Volts dc | 10 | ±10 | | Sensor thermal sensitivity shift with active temp. compensation | %/°C
maximum | ±0.01 (standard
range, 10°C - 50°C) | ±0.01 (standard
range, 25°C - 100°C) | | Standard measuring range | inch
(mm) | 0.050
(1.25) | 0.020
(0.50) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.3
0.5 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.1
0.2 | 0.1
0.2 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.04
0.08 | 0.06
0.12 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | | Extended measuring range | inch
(mm) | 0.070
(1.75) | 0.025
(0.625) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.7
1.0 | 0.8
1.0 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.2
0.3 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.04
0.15 | 0.06
0.15 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | |
9U ![[Sensor 9U]](images/sensr-9U.GIF)
Dimensions
shown in
inches (mm). back to top | Non-magnetic targets characterized on aluminum.
Magnetic targets characterized on 4130 steel. Sensor not available with extension cable for steel.
| Standard KµDA Sensor Type 9U | Non-magnetic
targets | Magnetic
targets | | Offset | inch
(mm) | 0.010
(0.25) | 0.015
(0.375) | | Full scale output voltage for testing | Volts dc | 10 | 10 | | Sensor thermal sensitivity shift with active temp. compensation | %/°C
maximum | ±0.01 (standard
range, 10°C - 50°C) | ±0.01 (standard
range, 25°C - 100°C) | | Standard measuring range | inch
(mm) | 0.100
(2.5) | 0.100
(2.5) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.8
1.0 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.1
0.2 | 0.1
0.2 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.08 | 0.03
0.09 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | | Extended measuring range | inch
(mm) | 0.150
(3.75) | 0.150
(3.75) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.7
1.0 | 0.8
1.0 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.2
0.3 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.15 | 0.04
0.15 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | |
12U ![[Sensor 12U]](images/sensr-12U.GIF)
Dimensions
shown in
inches (mm). back to top | Non-magnetic targets characterized on aluminum.
Magnetic targets characterized on 4130 steel. Sensor not available with extension cable for steel.
| Standard KµDA Sensor Type 12U | Non-magnetic
targets | Magnetic
targets | | Offset | inch
(mm) | 0.016
(0.4) | 0.016
(0.4) | | Full scale output voltage for testing | Volts dc | 10 | 10 | | Sensor thermal sensitivity shift with active temp. compensation | %/°C
maximum | ±0.01 (standard
range, 10°C - 50°C) | ±0.01 (standard
range, 25°C - 100°C) | | Standard measuring range | inch
(mm) | 0.160
(4.0) | 0.160
(4.0) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.8
1.0 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.1
0.2 | 0.1
0.2 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.08 | 0.03
0.09 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | | Extended measuring range | inch
(mm) | 0.240
(6.0) | 0.240
(6.0) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.7
1.0 | 0.8
1.0 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.2
0.3 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.15 | 0.04
0.15 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | |
16U ![[Sensor 16U]](images/sensr-16U.GIF)
Dimensions
shown in
inches (mm). back to top | Non-magnetic targets characterized on aluminum.
Magnetic targets characterized on 4130 steel.
| Standard KµDA Sensor Type 16U | Non-magnetic
targets | Magnetic
targets | | Offset | inch
(mm) | 0.020
(0.5) | 0.020
(0.5) | | Full scale output voltage for testing | Volts dc | 10 | 10 | | Sensor thermal sensitivity shift with active temp. compensation | %/°C
maximum | ±0.01 (standard
range, 10°C - 50°C) | ±0.01 (standard
range, 25°C - 100°C) | | Standard measuring range | inch
(mm) | 0.200
(5.0) | 0.200
(5.0) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.8
1.0 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.1
0.2 | 0.1
0.2 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.08 | 0.03
0.09 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | | Extended measuring range | inch
(mm) | 0.320
(8.0) | 0.320
(8.0) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.7
1.0 | 0.8
1.0 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.2
0.3 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.15 | 0.04
0.15 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | |
26U ![[Sensor 26U]](images/sensr-26U.GIF)
Dimensions
shown in
inches (mm). back to top | Non-magnetic targets characterized on aluminum.
Magnetic targets characterized on 4130 steel.
| Standard KµDA Sensor Type 26U | Non-magnetic
targets | Magnetic
targets | | Offset | inch
(mm) | 0.032
(0.8) | 0.032
(0.8) | | Full scale output voltage for testing | Volts dc | 10 | 10 | | Sensor thermal sensitivity shift with active temp. compensation | %/°C
maximum | ±0.01 (standard
range, 10°C - 50°C) | ±0.01 (standard
range, 25°C - 100°C) | | Standard measuring range | inch
(mm) | 0.320
(8.0) | 0.320
(8.0) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.3
0.5 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.1
0.2 | 0.1
0.2 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.08 | 0.03
0.09 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | | Extended measuring range | inch
(mm) | 0.500
(12.5) | 0.500
(12.5) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.7
1.0 | 0.8
1.0 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.2
0.3 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.15 | 0.04
0.15 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | |
38U 
Dimensions
shown in
inches (mm). back to top | Non-magnetic targets characterized on aluminum.
Magnetic targets characterized on 4130 steel.
| Standard KµDA Sensor Type 38U | Non-magnetic
targets | Magnetic
targets | | Offset | inch
(mm) | 0.050
(1.2) | 0.050
(1.2) | | Full scale output voltage for testing | Volts dc | 10 | 10 | | Sensor thermal sensitivity shift with active temp. compensation | %/°C
maximum | ±0.01 (standard
range, 10°C - 50°C) | ±0.01 (standard
range, 25°C - 100°C) | | Standard measuring range | inch
(mm) | 0.500
(12) | 0.500
(12) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.4
0.4 | 0.3
0.5 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.1
0.2 | 0.1
0.2 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.08 | 0.03
0.09 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | | Extended measuring range | inch
(mm) | 0.800
(20.25) | 0.800
(20.25) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.7
1.0 | 0.8
1.0 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.2
0.3 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.15 | 0.04
0.15 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | |
51U ![[Sensor 51U]](images/sensr-51U.GIF)
Dimensions
shown in
inches (mm). back to top | Non-magnetic targets characterized on aluminum.
Magnetic targets characterized on 4130 steel.
| Standard KµDA Sensor Type 51U | Non-magnetic
targets | Magnetic
targets | | Offset | inch
(mm) | 0.100
(1.5) | 0.100
(1.5) | | Full scale output voltage for testing | Volts dc | 10 | 10 | | Sensor thermal sensitivity shift with active temp. compensation | %/°C
maximum | ±0.01 (standard
range, 10°C - 50°C) | ±0.01 (standard
range, 25°C - 100°C) | | Standard measuring range | inch
(mm) | 0.600
(15) | 0.600
(15) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.4
0.4 | 0.3
0.5 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.1
0.2 | 0.1
0.2 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.08 | 0.03
0.09 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | | Extended measuring range | inch
(mm) | 1.000
(25.5) | 1.000
(25.5) | | Nonlinearity with 3 point
calibration (+/-%FS) | typical
maximum | 0.7
1.0 | 0.8
1.0 | | Nonlinearity with 21 point
calibration (+/-%FS) | typical
maximum | 0.2
0.3 | 0.2
0.3 | | Resolution (P-P %FS)
100 Hz mid scale
100 Hz full scale | typical
typical | 0.03
0.15 | 0.04
0.15 | | Resolution (P-P %FS)
1000 Hz mid scale
1000 Hz full scale | typical
typical | 0.10
0.30 | 0.10
0.30 | | |
![[KµDA]](images/z-kuda.gif){kind=small}
![[Features]](images/x-features.gif){kind=small}
![[Overview]](images/x-overview.gif){kind=small}
![[Sensors]](images/x-sensors-x.gif){kind=small}
![[Applications]](images/x-apps.gif){kind=small}
![[Specifications]](images/x-specs.gif){kind=small}
![[2U]](../../../images/z-sensors-2Ufirst.gif){kind=small}
![[4U]](../../../images/z-sensors-4U.gif){kind=small}
![[9U]](../../../images/z-sensors-9U.gif){kind=small}
![[12U]](../../../images/z-sensors-12U.gif){kind=small}
![[16U]](../../../images/z-sensors-16U.gif){kind=small}
![[26U]](../../../images/z-sensors-26U.gif){kind=small}
![[38U]](../../../images/z-sensors-38U.gif){kind=small}
![[51U]](../../../images/z-sensors-51U.gif){kind=small}
